• V-Tork VT065 Series Stainless Steel Pneumatic Actuator - top-down view showing FC port connections and quarter-turn drive shaft
  • V-Tork VT065 Series Stainless Steel Pneumatic Actuator - rear view showing spring end cap and corrosion-resistant stainless steel housing
  • V-Tork VT065 Series Stainless Steel Pneumatic Actuator - front view showing stainless steel body with red port caps and visual position indicator
  • V-Tork VT190S12 Spring Return Pneumatic Actuator F10/F14 - rear view showing spring end cap and corrosion-resistant aluminium housing
  • V-Tork VT190S12 Spring Return Pneumatic Actuator F10/F14 - angled side view showing ISO mounting interface and spring return mechanism
  • V-Tork VT190S12 Spring Return Pneumatic Actuator F10/F14 - front view showing aluminium body with red port caps and visual indicator
1 6

Valves UK

V-Tork VT110S05 Double Acting Pneumatic Actuator F07/F10

V-Tork VT110S05 Double Acting Pneumatic Actuator F07/F10

£151.61 GBP
£151.61 GBP
Sale Enquire Now
Taxes included. Shipping calculated at checkout.

The V-Tork VT110S05 Double Acting Pneumatic Actuator is a reliable, rack and pinion quarter-turn actuator suitable for a wide range of industrial valve automation applications. The aluminium alloy body with epoxy coating provides durability and protection against corrosion.


Featuring double acting functionality, this actuator automatically reverts to its fail-safe position upon loss of air supply, ensuring operational safety in critical processes. ISO 5211 F07/F10 mounting allows direct valve attachment without adapters.


Key Features:

  • Double acting fail-safe mechanism
  • - ISO 5211 F07/F10 mounting interface
  • - Operating pressure: 4-8 bar
  • - Lightweight aluminium alloy body with epoxy coating
  • - Suitable for ball valves, butterfly valves, and plug valves
  • - Part of the V-Tork Technology actuator series
  • - Low maintenance and long service life

Ideal for use in water supply, irrigation, HVAC systems, chemical processing, and general industrial automation.

View full details

Enquire Online!

Enquire

FAQ's

What is the difference between a valve and an actuator?

A valve controls the flow of a fluid (such as water, gas, or steam), while an actuator is the device that operates the valve — automatically opening, closing, or positioning it. Actuators can be electric, pneumatic, or hydraulic, depending on the application and control requirements.

What types of actuators are available?

The main types of actuators are:

Pneumatic actuators – use compressed air for fast, reliable operation.

Electric actuators – use electrical power for precise control.

Hydraulic actuators – use fluid pressure for high-torque applications.

Each type offers unique advantages depending on the environment, media, and system control needs.

How do I choose the right actuator for my valve?

To select the correct actuator, consider:

Valve type and torque requirement

Power source available (air, electric, or hydraulic)

Operating environment (temperature, humidity, hazardous area)

Control signal type (on/off or modulating)

Matching actuator torque and compatibility with the valve’s ISO mounting ensures reliable performance.

What are the main types of valves used in automation?

The most common valves in automated systems include:

Ball valves – for tight shutoff and quick operation.

Butterfly valves – for larger flow control with compact design.

Globe valves – for precise throttling and flow regulation.

Check valves – to prevent backflow.

Gate valves – for full bore flow isolation.

What’s the difference between a double-acting and spring-return actuator?

Double-acting actuators use air (or power) to both open and close the valve.


Spring-return actuators use air to open (or close) the valve, and a built-in spring to automatically return it to a safe position when power or air is lost — ideal for fail-safe operation.

How often should valves and actuators be serviced?

Regular maintenance intervals depend on operating conditions, but a good rule of thumb is to inspect every 6–12 months.

This includes checking for leaks, lubrication, seal wear, and actuator responsiveness to prevent unexpected downtime.